Call Center (Open M-F 9-5pm EST)

Create Account / Log In

Chania
Position: Index>Hose Nozzle

HoseNozzle

HoseNozzle
Product Attributes

Product Description

Water Cannon For Fight Fighting is suitable for the fireground far from the water source where the fire truck can not enter; it is used to extinguish the general solid material fire and oil fire as well as cool the oil tank. The cannon has the characteristics of adjustable flow, long range, multi-function, small volume and good performance, and it is the site management of conventional fire trucks, oil tankers, wharfs, etc. The mobile fire-fighting gun is mainly composed of mobile site, mop, intake pipe, rotary body and gun head, and it has two 65-diameter intakes. Under the same pressure, the flow of the water-gun can be adjusted, and with the infinite adjustment of the direct current to 90 degree water mist jet can be implemented, which can result in better fire-fighting and cooling effect. It has good fire extinguishing performance. The gun is suitable for petrochemical enterprises, storage tanks, hangars, warehouses, port terminals and other places, and it is also an ideal vehicle-mounted fire gun for fire trucks.

TECHNICAL PARAMETERS OF WATER CANNON FOR FIRE FIGHTING
 Model No. PSKDY 40ZB
 Type Auto-oscillation
 Rated Working Pressure 0.8 MPa 
 Flow Rate 40L/S
 Effective Range More than 60 m
 The Minimum Elevation Range 30°-70°
 Horizontal Rotation Angle 90°
 The Maximun Spray Angle

 95°

 Weight

 35kg

 Package Size

 80cm*50cm*50cm



Function Introduction

1. Straight stream & spray: rotating gun head, water flow from spray to straight stream;

2. The rise and fall: rotary swing handle, barrels rises and falls from 30 ° ~ 70 °;

3. Left and right: manual swing in the desired direction;

4. Control distance: 0~150m;

5. Three modes: remote control, gun position control and manual operation.
Installation, Debugging and Operation

1. Open the support feet at the base and support it flat on the ground.

2. Connect the safety chain to the fixed object of the gun body. A wooden rod can be fixed on the front of the gunIf there is no fixed object.

3. Connect the hose.

4. Open the water source valve and pressurize the water supply to the gun body.

5. According to actual combat needs, remotely adjust the angle of the gun head's inclination, elevation, left and right swinging angle, flowering or straight stream state.

6. This gun has left and right self-pendulum function, and the self-pendulum angle is 30°.

7. After use, drain all the remaining water in the water cannon (this cannon has automatic drainage function), remove the boiled water with buckle, and collect the supporting feet.